Model SC09FE provides a cost-effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions. It has an added benefit of 10/100 Auto-negotiation making it the perfect choice when planning future upgrades of 10Base-T networks. Built-in Auto-sensing capabilities enable Full or Half-duplex Ethernet operation with no configuration required.
Datasheet 
Model SC09 provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions. It has an added benefit of 10/100 Auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required..
CE Certified
Model SC09FENG provides a cost effective plug-and-play solution for long-range Giga Ethernet extensions. It is a perfect choice when planning future upgrades of Ethernet networks. Built-in Auto-sensing capabilities enable Full or Half-duplex Ethernet operation with no configuration required.
SC09FER finds application in long-distance transmission of Ethernet networks. It is a kind of cost-effective media converter rack (2U) widely used in the equipment room. Different types of media converters can be inserted into this rack, with total slots up to 16. It can have two Power supplies supporting Auto switchover in case of failure.
SC09FER series finds application in long-distance transmission of Ethernet networks. It is a kind of cost-effective Media Converter Rack (2U) widely used in the equipment room. SC09FER PCB cards are Media Converter PCB’s that slide inside the Rack. Different types of Media Converter PCB’s can be inserted into this Rack.
*Upto 16 Media Convertre in a Rack
*Each media card is hot swappable.
*LFPT support is optional
SC12FE2IS is an Industrial grade Media Converter with 2 * 10/100Mbps RJ45 ports and 1 Fiber port. With 10/100 Mbps, Auto Negotiation, it extends the transmission distance from 100m to many Km’s easily. It adopts industrial design, fanless, low power consumption, and great EMC protection. The working temperature range is -40 to 85°C.The reverse polarity protection prevents from damage. It supports industrial standard DIN-Rail installation or wall-mounted installation. It can be widely
SC12FEISG support 1 of 10Base-T/100Base-TX/1000 Base-TX port and 1 of 1000Base-FX Fiber port. It supports industry-standard design, IP40 protection, rugged high-strength metal case, 12 to 48VDC power supply input, -40 to 85°C working temperature, etc.
With 10/100/1000 Mbps, Auto-Negotiation extends the transmission distance from 100m to many km easily. It can be widely used in the field of Power, Railways, Mines, CCTV Surveillance, and other industrial automation fields
The SC12FPIAG series is Industrial PoE Media Converter. It is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc. In addition to transmitting data, the twisted-pair injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. SC12FPIAG Power over Ethernet Powered Device is IEEE 802. 3af/at complaint. The SC12FPIAG series is designed to extend the distance of a
SC04US converts RS232 signals to RS485 and vice versa. SC04US is a bidirectional RS232 to RS485 Converter. These converters carry RS232 signals to long distances. This converter facilitates RS232 devices to be multidropped on the RS485. Hardened Protection features and a unique Power supply design have been incorporated keeping in mind the high electrically noisy applications like Solar and Power.
Model SC04 converts RS232 signals to RS485 and vice versa. SC04 is a bidirectional RS232 to RS485 Converter. These converters carry RS232 signals to long distances. This converter facilitates RS232 devices to be multidropped on the RS485. Hardened protection features and a unique power supply design have been incorporated keeping in mind the high electrically noisy applications like Solar and Power.
Interface Converters are used to convert RS232 devices to RS485 and vica versa. SC04U is a Bi directional RS232 to RS485 Converter. The Input Serial port is RJ45 instead of DB9. These converters are used for running RS232 signals through long distances (upto 1.2km). This converter can also facilitate multiple field devices to be multidropped on the RS485 and allow their connectivity to a RS232 device.
Interface Converters are used to convert RS232 devices to RS485 and vica versa. SC04U is a Bi directional RS232 to RS485 Converter. These converters are used for running RS232 signals through long distances (upto 1.2km). This converter can also facilitate multiple field devices to be multidropped on the RS485 and allow their connectivity to a RS232 device. It is an ideal product for high noise applications like Solar / Power etc.
SC07 is used to expand Line driving capability of RS485 / RS422 beyond 1.2 km. It also converts RS485 to RS422 ( and vica versa ). It can also be used as RS485 Isolator. They are used for providing Isolation to Serial Interface. With high degree of protection, it keeps the COM port of your equipment safe.
SC07 is used to expand Line driving capability of RS485 / RS422 beyond 1.2 km. It also converts RS485 to RS422 ( and vica versa ). It can also be used as RS485 Isolator. They are used for providing Isolation to Serial Interface. With high degree of protection, it keeps the COM port of your equipment safe.
They are used for providing Isolation to RS232 Interfaces. With high degree of protection, it keeps the COM port of your equipment safe.
SP PR10G is a single port PoE surge protector, with 1 input port and 1 output port, supports 8 line network signals and PoE Surge protection. It is designed to handle differential mode surge voltage (8/20us) 4KV and Common mode surge voltage (8/20us) 6KV, and supports 100/1000Mbps.
It is compliant with IEEE802.3af/at/PoE++ standard and protects PoE switch and Midspan devices effectively against surge damage. SP PoE PR10G is designed for indoor use.
Electronic equipment is susceptible to transient disturbances from a variety of sources including ESD to an open connector or Interface, direct or nearby lightning strikes to cables and wires, and charged cables “hot plugged” into I/O ports. SP485-S is designed to protect Serial port from damage which may result from such transient events. The protection includes current limitation, voltage clamping, grounding the lightening and surge arresting using a mix of various protection
Electronic equipment is susceptible to transient disturbances from a variety of sources including ESD to an open connector or Interface, direct or nearby lightning strikes to cables and wires, and charged cables “hot plugged” into I/O ports. SP485 is designed to protect Serial ports from damage which may result from such transient events. The protection includes current limitation, voltage clamping, grounding the lightening and surge arresting using a mix of various protection
The RS485 Hub transforms RS485 bus into star topology making RS485 a dependable network. Each RS485 Hub Port is Isolated from the other and support 1.2Km run of multidropped RS485 devices. Additionally, the Hub ports are Optically Isolated, Short Circuit, Surge & ESD protected rendering ruggedness to your network. In case if there is a cable fault or a RS485 device failure or a shorting in the network, the problem is restricted to only that ports of the Hub. Connect with ease as
The RS485 Hub transforms RS485 bus into star topology making RS485 a dependable network. Each RS485 Hub Port is Isolated from the other and support upto 5Km run of multidropped RS485 devices. Additionally, the Hub ports are Optically Isolated, Short Circuit, Surge & ESD protected rendering ruggedness to your network. In case if there is a cable fault or a RS485 device failure or a shorting in the network, the problem is restricted to only that ports of the Hub. Connect with ease as many as
SAN offers a full line of Serial to Ethernet converters, allowing access of Serial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc., to be connected on LAN or to allow Ethernet connectivity to your legacy serial devices helping them to run Serial ports long distance over LAN network. Or with Virtual COM port utility, connect Protocol independent Serial devices over LAN.
SC10EK also supports 230V AC built in power supply.
.jpg)
SAN offers a full line of Serial to Ethernet converters, allowing access of Serial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc., to be connected on LAN or to allow Ethernet connectivity to your legacy serial devices helping Serial ports run long distance over LAN network. Or with Virtual COM port utility, connect Protocol independent Serial devices over LAN.
SC10EKE supports 230V AC built in power supply.
SAN offers a full line of Serial to Ethernet converters, allowing access of Serial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc to be connected on LAN or to allow Ethernet connectivity to your legacy Serial device. Run Serial port long distance over LAN network or with Virtual COM port utility connect Protocol Independent Serial devices over LAN and remotely manage the Serial device over Ethernet.
SAN offers a full line of Serial to Ethernet converters, allowing access of Serial (remote) devices like Access Controllers, Fire Alarm panels, Industrial Automation products etc to be connected on LAN or to allow Ethernet connectivity to your legacy serial device.
You can convert 1/2/4/8 Serial ports to Ethernet on a single IP helping them run long distance over LAN network. Or with Virtual COM port utility, connect Protocol independent Serial devices over LAN or connect multiple Serial
Modbus is an industry adopted communication protocol based on RTU, ASCII, and TCP protocols for various applications. These
three protocols are commonly used by various applications in the industry such as DCS, PLC, HMI, Power meters, Solar, various
Sensor and Measuring instruments. SC10MK2 has 2 Serial ports and converts between Modbus RTU/ASCII and Modbus TCP protocols. Users can easily integrate Modbus TCP and Modbus Serial devices. Configuration is by Web browser. It has Dual Power Input
Modbus is an industry-adopted communication protocol. SC10MK2 MT is a 2 Port Modbus RTU to Modbus TCP Converter. SC10MK2 MT allows up to 8 Modbus/TCP masters and with 32 simultaneous requests per Master, to get the polling data via the Ethernet. A high-end CPU makes it an idle choice for applications like Energy Meters, Solar controls, Data connectivity applications between DCS, PLC, HMI, Sensors, Measuring instruments, etc.
SC10MK2-485 MT is a 2 Serial Port Modbus RTU to Modbus TCP protocol converter. High end CPU makes it an idle choice for applications like Energy Meters, Solar controls, Data connectivity applications between DCS, PLC, HMI, Sensors, Measuring instruments etc. Both the Serial ports are RS485/422 configurable.
SC10MK2-485 MT is a 2 Serial Port Modbus RTU to Modbus TCP protocol converter. High end CPU makes it an idle choice for applications like Energy Meters, Solar controls, Data connectivity applications between DCS, PLC, HMI, Sensors, Measuring instruments etc. Both the Serial ports are RS485/422 configurable. It has Dual Power Input with an additional option of PoE Power
CPU : MT7688AN MIPS CPU, 580 MHz
RAM : 128M Bytes DDR2 RAM
ROM : 32M Bytes Flash ROM
OS : Open Wrt Linux OS
Support 8 Modbus TCP Master each 32 simultaneous request or 8 TCP Slave on each RTU port. Modbus TCP Master needed to be assigned different port no’s for each Serial port e.g. 502, 503, 504 & 505
SC11U allows you to connect your Serial devices to a USB Interface. With data format auto detecting and baud rate auto switching function, SC11U is able to automatically detect the data flow and switch the direction of the data lines as well as to automatically configure RS422/485 signals to any baud rate without external switch setting. Equipped with 3000VDC of isolation and internal surge-protection on each data line, SC11U gives the host computer and module, protection from destructive
SC11 allows you to connect your Serial devices to a USB Interface. With data format auto detecting and baud rate auto switching function, SC11 is able to automatically detect the data flow and switch the direction of the data lines as well as to automatically configure RS422/485 signals to any baud rate without external switch setting. It is equipped with internal surge-protection on each data line. SC11 features high speed serial transmission and supports various O.S.
It is self powered
With rapid development of computer industry, USB has taken the place of various kinds of traditional low speed peripheral interfaces. However, Serial interface designs are still used in many of the important facilities and therefore, there is a need for a Serial to USB converter to transfer data from USB of a computer to Serial devices.
SC11 series converters allows you to connect your Serial devices to a USB Interface. With data format auto detecting and baud rate auto switching function,
Serial communication has distance limitations. Breakages in multidrop connections lead to loss in data making it unsuitable for critical communication. The SC12FS SH I is a Self-Healing RS232/RS485/422 to Dual - Full Duplex Fiber port converter forming a Redundant Optical Fiber ring. Instead of multidropping Serial devices on RS485, you can effectively multidrop them on Fiber, giving you the advantage of Redundancy, distances as large as 100 km instead of 1.2Km, as well offering immunity to
SC09FSNN is a RS232/RS485/RS422 to fiber optic converter. It is used to solve the electromagnetic interference and to extend the RS232/RS485/RS422 serial port transmission distance to several kilometers.SC09FSNN can provide users with RS232/RS485/RS422 serial port end-to-end transparent transmission.
SC09FS series of converters are an ideal choice for connecting devices situated in environments where electromagnetic & radio frequency is a major concern. They economically & efficiently extend the Serial port over a distance up to 2 Km over Multi-mode fiber or up to 100Km over Single-mode fiber. The converter is equipped with multiple interface circuit such as RS232, RS422, RS485 (2 or 4 wire). It secures data transmission at speeds up to 115.2kbps for RS232, or up to 500Kbps for
SC09FSR series finds application in long distance transmission of Serial signals. It is a cost effective 19 inch rack (2U) which can be used in the equipment room. Different types of converters ( MM/SM) can be inserted into this rack, with total slots up to 14. It can have two Power supplies supporting Auto Switch over in case of failure ensuring uninterruptible operation of the system.
You can choose between AC 220V/DC48V power supplies.
.png)
The SC09 MMSM series Media Converter can provide date transmission between Multi-mode (850nm or 1310nm) and Single mode (1310nm or 1550nm). Different date rate (155M for Fast Ethernet networking or 1.25G for Gigabit Ethernet networking) and distance can up to 100km is available
SC09FS series of converters are an ideal choice for connecting devices situated in environments where electromagnetic & radio frequency is a major concern. They economically & efficiently extend the Serial port over a distance up to 2 Km over Multi- mode fiber or up to 20Km over Single-mode fiber. The converter is equipped with multiple interface circuit such as RS232, RS422, RS485 (2 or 4 wire). It secures data transmission at speeds up to 115.2kbps for RS232, or up to 500Kbps for
The SC09FG series is designed for use in Genius Optical networks. It is packed with feature like data rate up to 153.6kbps, 35mm DIN rail mounting, Redundant power input (9V~30VDC),relay output alarm etc. It contains one fiber optic transceiver and one electrical interface.SC09FG-2 contains two fiber optic transceivers and one electrical interface. The repeaters provide fiber optic connection in point to point, star, daisy chain topologies networks.
The SC09FPC series is designed for use in Profibus-DP fieldbus networks. It is packed with feature like data rate up to 12M,35mm DIN rail mounting, Redundant power input(9V~30VDC),relay output alarm etc. It contains one fiber optic transceiver and one electrical interface.SC09FPC-2 contains two fiber optic transceivers and one electrical interface. The repeaters provide fiber optic connection in point to point, star, daisy chain topologies networks.
SC09FPCR is a Profibus DP fiber optic Repeaters, supporting upto 2 PROFIBUS DP fieldbus ports and upto 2 of 155M Dual Fiber optical interfaces. It offers optical fiber redundant ring network function, when fiber optic has a fault somewhere, the system will rebuild the network link within 20ms, to guarantee the normal system communication. It support optical fiber link failure and bus error alarm output and LED indication This equipment support dual network redundancy and fiber optic ring
SAM 201I has been designed to cater to the requirement of Sharing / offeringRedundancy for the Serial Ports. It is Protocol independent with all the 3 Ports are RS232.
All the 3 Serial ports are 3KV Optically Isolated
Many applications in Industrial PLC or SCADA communication require multiple Slave devices to be shared with 2 (two) Masters. Alternatively, Single Master wants to communicate with multiple slave devices. Serial Redundancy Switch (SRS) has been designed to cater to this specific requirement. It is Protocol independent & has different operating modes. The Serial communication parameters are field selectable using DIP switch. All ports of this product are RS485 2 Wire with built in termination
Serial Modbus to Wi-Fi Modbus TCP Converter provides a perfect solution to make your Serial devices Internet / Ethernet ready, instantly, via wireless LAN making it possible for your software to access serial devices anywhere and anytime. SC10WBM ensures the compatibility of network software that uses a standard network by providing TCP Server Mode, TCP Client Mode, and UDP Mode and Virtual Com ports can be set up to work over a TCP/IP network in no time It can be configured through any WiFi
Replaces any existing RS232 cable
Full Bluetooth 2.0+ EDR support
It can also communicate with other Bluetooth devices
No external software needed
Easy to install
Baud rate : 1200bps to 115.2kbps
Distance from 150 to 300 feet with CLASS 2 and CLASS 1 Enhanced Antenna
Plug-and Play type
Sensors and controls don’t need high bandwidth but they do need low latency and very low energy consumption for long battery lives and for large device arrays. ZigBee is poised to become the global control/sensor network standard. It has been designed to provide Low power consumption. Users expect batteries to last many months to years! Multiple topologies: star, peer-to-peer, mesh are possible.
Cellular modem is a multi-functional, ready to use, rugged unit that can be embedded or plugged into any application. The modem can be controlled and customized to various levels by using the standard AT commands. The modem is fully type-approved, it can speed up the operational time with full range of Voice, Data, Fax and Short Messages.
SC12FE2ISG is an Unmanaged Ethernet switch/Converter with 2 of 10/100/1000 Mbps RJ45 ports and 1 Gigabit fiber port. It extends the transmission distance from 100m to many Km’s easily. It is Industrial design with working temperature range is -40 to 85°C, low power consumption, and great EMC protection. It can be widely used in the field of Power, Railways, Mines, CCTV Surveillance and other industrial automation fields
SC12FE2I is a Industrial grade Dual 10/100Base-TX ports to 100Base-FX unmanaged standalone media converter. It enables you to mix legacy twistedpair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free & robust process of Data conversion. Both Multi-mode and Single mode Fiber options are available. With Auto-Negotiation function, these units will automatically tailor themselves to convert both Half or Full duplex Ethernet signals, depending on your specific
SC12FEISG S series are Gigabit Ethernet to fiber media converters. It provides 1* 10/100/1000Base-T Ethernet port and 1* 1000Base-X fiber port. It is used for data communication between Ethernet port & Fiber port. The operating temperature is -40 to 85°C, together with strong EMC performance, it guarantees device working stability in harsh environment. The device greatly extends network transmission distance.
SC12FEI is an Industrial grade 10/100Base-TX to 100Base-FX unmanaged standalone media converter. It enables you to mix legacy twisted-pair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free & robust process of Data conversion Both Multi-mode and Single mode Fiber options are available. These units will automatically tailor themselves to convert both Half or Full duplex Ethernet signals, depending on your specific network needs
IESM S 308X series are managed industrial Ethernet switches. It supports up to 8 of 10/100 Copper ports, up to 4 of 100FX fiber ports & up to 4 of 1000FX SFP ports. It supports 1 console port, provides CLI management; and it supports industrial field Ethernet layer 2 protocol. This series supports port mirroring, VLAN, IGMP, QoS, STP, RSTP, and other management functions such as Console, Telnet, Web, SNMP, and relay alarm output. It provides a safe and reliable solution for industrial
IESM S 30XX series are Managed Industrial Ethernet switches. It supports up to 8 Ethernet ports, up to 4 of 100FX fiber ports & up to 2 Giga Fiber ports. It supports 1 console port, provides CLI management; and it supports industrial field Ethernet layer 2 protocol. This switch is low power consumption. The fanless design prevents it from noise interference. The operating temperature range is from -40 to 850C and together with EMC compatibility, it makes the switch works stable in poor
IESM S 30XX series are managed industrial Ethernet switches. It supports up to 16 10/100 Copper ports, 4 of 100FX fiber ports & upto 4 of 1000FX SFP ports. It supports 1 console port, provides CLI management; and it supports industrial field Ethernet layer 2 protocol.
This series supports port mirroring, VLAN, IGMP, QoS, STP, RSTP, and other management functions such as Console, Telnet, Web, SNMP, and relay alarm output. It provides safe and reliable solution for industrial automation,
IESM S 3016 is a Managed industrial Ethernet switch. It supports 16 of 10/100 Copper ports. It supports 1 console port, provides CLI management and it supports industrial field Ethernet Layer 2 protocol. This series supports port mirroring, VLAN, IGMP, QoS, STP, RSTP, and other management functions such as Console, Telnet, Web, SNMP, and relay alarm output. It provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial
IPSMG 308-6S Industrial Managed Switch is fully Managed L2 switch, with Store- Forward architecture, fan-less and energy-saving design, with 8 * 10/100/1000Base- T PoE(af/at) Copper port and 6 * 1.25G/155M SFP fiber port.
IPSMG 308-6S is designed with protection against Lightning, anti-static and operate in -40°C to 75°C for harsh environments such as Industrial automation, Security, Power system, Intelligent transportation systems (ITS), Mining, Water Management & Oil fields.
IESMG 30X-2S A Industrial Managed Switch is fully Managed L2 switches, with Store-Forward architecture, fan-less and energy-saving design, with 4 or 8 * 10/100/1000Base-T Copper port and 2 * 1.25G/155M SFP fiber port.
IESMG 30X-2S A is designed with protection against Lightning, anti-static and operate in -40°C to 85°C for harsh environments such as Industrial automation, Security, Power system, Intelligent transportation systems (ITS), Mining , Water Management & Oil fields.
IESMG 308-XS A Industrial Managed Switch is fully Managed L2 switch with Store-Forward architecture, fan-less and energy-saving design, with 8 * 10/100/1000Base-T Copper port and Upto 6 * 1.25G/155M SFP fiber port. IESMG 308-XS A is designed with protection against Lightning, anti-static and operate in -40°C to 85°C for harsh environments such as Industrial automation, Security, Power system, Intelligent transportation systems (ITS), Mining , Water Management & Oil fields.
IESMG 308 series are 10 and 12 Port Managed full Gigabit industrial Ethernet switches. It supports upto 4 Gigabit fiber ports, 8 Gigabit RJ-45 ports, and 1 console port, which provides CLI management. It supports Ethernet layer 2 protocols. This series switch is low power
consumption; and the fanless design. The operating temperature range is from -40 to 85°C. With strong EMC compatibility, it provides safe and reliable solution for industrial automation, intelligent transportation, video
IPSMG 304-2S A Industrial Managed Switch is a fully managed L2 switch, with Store and Forward architecture, Fan-less and energy-saving design, with 4 * 10/100/1000Base-T Copper port and 2 * 1.25G/155M SFP fiber port. IPSMG 304-2S A is designed with protection against Lightning, anti-static and operate in -40°C to 75°C for harsh environments such as Industrial Automation, Security, Power system, and Intelligent transportation systems (ITS), Mining, Water Management & Oil fields.
IPSMG 308-2S Industrial Managed Switch is a fully managed L2 switch, with Store-Forward architecture, fan-less and energy-saving design, with 8 *10/100/1000Base-T PoE(af/at) Copper port and 2 * 1.25G/155M SFP fiber port.
IPSMG 308-2S is designed with protection against Lightning, anti-static and operates in -40°C to 75°C for harsh environments such as Industrial Automation, Security, Power Systems, and Intelligent transportation systems (ITS), Mining, Water Management & Oil
IPSMG 308-4S Industrial Managed POE Switch is a High Power Sourcing Equipment ( PSE) device that is compliant with the IEEE802.3af/at standard, providing Power-over-Ethernet over twisted pair cables in an Ethernet network. With Four Gigabit SFP Slot, the switch extends Ethernet over distance via fiber, while also eliminating the need for individual power supplies for IP video cameras and wireless access points. An extended operating temperature range allows installation in cabinets or
IESM R S series are Managed Industrial Ethernet Rack type switches. It supports up to 28 ports, which includes 4 Gigabit ports. This series supports port mirroring, VLAN, IGMP, QoS, STP/RSTP, and other management, such as Console, Telnet, Web, SNMP, and relay alarm output. This provides a safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.
IESMG R, a full Gigabit Managed Industrial Ethernet switch, supports up to 28 Gigabit ports, includes 12 Gigabit fiber ports. It supports 8 Giga Combo Ports. This series supports port mirroring, VLAN, IGMP, QoS, STP/RSTP, ACL and other management, such as Console, Telnet, Web, SNMP, and Relay alarm output. It supports Layer 3 switching technology (static route/Rip/OSPF/VRRP). This provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and
The IPSMGR 3016-2SG series are designed for Industrial applications. Thanks to its wide operating temperature it can operate reliably in extremely harsh environments. Designed with 16 Gigabit ports and 2 Gigabit SFP ports (Combo), it provides abundant and flexible connection. It contain surge protection to ensure system stability and relay outputs for greater user flexibility.
The IPSMGR 3024-4S series is designed for Industrial applications. Thanks to its wide operating temperature it can operate reliably in extremely harsh environments. Designed with 24 Gigabit ports and 4 Gigabit SFP ports (Combo), it provides abundant and flexible connection. It contain surge protection to ensure system stability and Relay outputs for greater user flexibility.
SP PR10G is a single port PoE surge protector, with 1 input port and 1 output port, support 8 lines network signals and PoE Surge protection. It is designed to handle differential mode surge voltage (8/20us) 4KV and Common mode surge voltage (8/20us) 6KV, and support 100/1000Mbps.
It is compliant with IEEE802.3af/at/PoE++ standard and protects PoE switch and Midspan devices effectively against surge damage. SP PoE PR10G is designed for indoor use.
PoE Injector is also called Power over Ethernet mid-span device. Single port PoE injector is PoE power supply module. There are 2 x RJ45 PoE ports one of which is the Ethernet In Port for the uplink of upper switches or other upper network devices, and another is PoE Out port used as the port for network data and power output. These single-port PoE injectors supply power with the spare line pair (4/5 (+), 7/8 (-) method or the data line pair 1/2(+), 3/6(-) method. These single-port PoE
The SC12FPIA 100P series is Industrial PoE Media Converter. It is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc. In addition to transmitting data, the twisted-pair injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. SC12FPIA Power over Ethernet Powered Device is IEEE 802. 3af/at the complaint.
The SC12FPIA series is designed to extend the distance
SCV09VFN series video Digital Optical Converter adopts the advanced international digital video and optical fiber transmission technology and implements the transmission of real-time & synchronization, no-distortion, and high-quality video effect. The play-and-plug design makes the installation more convenient and easier.
SCV09VFNR PCB is Video Digital Optical Converter PCB sliding inside the Rack. It adopts the advanced international digital video and optical fiber transmission technology and implements the transmission of real-time & synchronization, no-distortion, and high-quality video effect. The play-and-plug design makes the installation more convenient and easier.
SC09VFNR 16 is a cost-effective rack (2U) widely used to provide power for standalone type video converter in the equipment room. Total slots are up to 16. It has two (Redundant) power supplies, (AC 220V) supporting automatic switch-over. The configuration of active/standby power supply ensures uninterruptible operation of the system Supports hot swapping of Converter cards It supports 1 or 2 Video Channel with data option converter cards
GSF 8362Q Router is a Cellular device that provides data transmission function by public LTE / WCDMA network.
It supports 1 * RS232/RS485, 1 * Ethernet LAN, 1 * Ethernet WAN, and 1 * WiFi ports that can conveniently and transparently connect your existing serial and Ethernet devices to a cellular network.
It has been widely used in M2M fields, such as a self-service terminal, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment
LTE&WCDMA Router is a cellular device that provides data transmission function by public LTE / WCDMA network It uses Industrial 32-bits CPU and embedded real time operating system It supports RS232 (or RS485/RS422), Ethernet and WiFi ports that can conveniently and transparently connect your existing serial and Ethernet devices to a cellular network It has been widely used on M2M fields, such as self-service terminal, intelligent transportation, smart grid, industrial automation, telemetry,
GSF 8364 LTE&WCDMA Router is a Cellular device that provides data transmission function by public LTE / WCDMA network It uses Industrial 32-bits CPU and embedded Real-Time Operating system It supports RS232 (or RS485/RS422), Ethernet, and WiFi ports that can conveniently and transparently connect your existing serial and Ethernet devices to a Cellular network It has been widely used on M2M fields, such as self-service Terminal, Intelligent transportation, Smart grid, Industrial automation,
.png)
GSF 9364 LTE & WCDMA Router is a Cellular device that provides data transmission function by public LTE / WCDMA / TD-SCDMA/EVDO network It uses Industrial 32-bits CPU and embedded real-time operating system It supports RS232 (or RS485/RS422), Ethernet and WiFi ports that can conveniently and transparently connect your existing Serial and Ethernet devices to a cellular network It has been widely used on M2M fields, such as a self-service terminal, intelligent transportation, smart grid,
M2M Gateway is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering, etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n/802.11ac, and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, a wide operating temperature range, and IP30 metal housing, the GSF M2M 200R is a
M2M GATEWAY is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Softwaredefined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, wide operating temperature range, and IP30 metal housing, the M2M GATEWAY is a convenient yet
IESM S 1164 is Unmanaged Industrial Ethernet Switch. It supports 20 ports, which include 4 Gigabit SFP fiber ports. This switch has low power consumption. The fanless design prevents it from noise interference. The operating temperature range is from -40 to 750C. These features make the switch safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial and networking applications.
 100Base compact Industrial Ethernet Switch
 Support upto 2 of 10/100 Base-T(X) RJ45 port and upto 2 of 100Base-
FX Optic Fiber SC interface, max distance to 120km
 IP40 protective case
 Industrial-grade Level 4 EMC design
 Support 802.3/802.3u, Store-and-Forward switching,
 Auto Full Duplex/ Half Duplex and Auto MDI/MDI-X connection
 Auto Negotiation
 Support 12 to 48V DC power input, full load power consumption less
than 4W

Support 4 of 10/100 Base-T(X) RJ45 port and 1 of 100Base-FX Optic Fiber SC interface, max distance to 120km Auto Full Duplex/ Half Duplex and Auto MDI/MDI-X connection Auto-Negotiation Support 802.3/802.3u, Store-and-Forward switching, IP40 protective case with high-grade Level 4 EMC design 12 to 48V DC power input, full load power consumption less than 4W DIN35 Rail or wall-mounted Wide Temperature range -40 to 85°C.
It can meet the requirements of all kinds of Industrial fields,
4 Fast Ethernet ports, Auto-negotiation speed, Auto Full/Half Duplex Mode, and Auto MDI/MDI-X connection 2*100BaseFX ports, SC connector default, Maximum 120km distance Wide range voltage 12 to 48V DC power input, Dual Supply Metal housing with IP40 protection, support high EMC level DIN-Rail Mounting and Wall Mounting supported Wide Operating Temperature (-40 to 85°C) to satisfy harsh industrial environment.
5 Port 10/100Mbps Ethernet RJ45, 10/100Mbps Auto-negotiation, Auto-MDI/MDI-X LED indicators for monitoring Power/Link/Activity, Supports 10/100Mbps-Full/Half-duplex, DIN-Rail installation, Supports Broadcast Storm Control, 6KV Super lightning protection for the Ethernet Port, IP40 Ingress protection, Excellent heat elimination without cooling fan, Dual DC power inputs, -400C to 850C Operating Temperature range.
 8 Port 10/100Mbps Ethernet RJ45
 10/100Mbps Auto-negotiation, Auto-MDI-MDI-X
 LED indicators for monitoring Power/Link/Activity
 Supports 10/100Mbps-Full/Half-duplex
 Supports Wall-mount, DIN-Rail installation
 Supports Broadcast Storm Control
 6KV Super lightening protection for the Ethernet Port
 IP40 Ingress protection.
 Excellent heat elimination without cooling fan.
 Dual DC power inputs.
 -400C to 850C operating
IPS S 1050 switch is special designed for industrial applications. It has standard metal housing design which is easy for installation. It is compatible with IEEE802.3 10BASE-T, and IEEE802.3u 100BASE-TX fast Ethernet.
IPS S 1080 POE switch is specially designed for industrial applications. It has standard metal housing design which is easy for installation. It is compatible with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX fast Ethernet.
IES S 1082 is an Unmanaged Industrial Ethernet Switch. It supports up to 10 ports, which include 2 of 100FX Fiber ports. This switch has low power consumption. The fanless design prevents it from noise interference. The operating temperature range is from -40 to 750C. These features make the switch a safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial and networking applications.
IES S 10XX series are Unmanaged 8 Port 10/100 Industrial Ethernet switches. It supports up to 4 no’s 100F(X) Fiber ports and up to 8 no’s 10/100 RJ-45 ports. This enhances the networking flexibility. This switch is low power consumption; the fanless design prevents it from noise interference, the operating temperature range is from -40°C to 85°C. These features make it provide safe and reliable solution for industrial automation, intelligent transportation, video
The IPS 104-2S series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. All PoE Powered Devices (IEEE 802.3af/at complaint) are supported, and can deliver a full 15.4W / 30W of power to the remote device.
The IPS 104-2S features 2 x 100Base-FX fiber port and 4 x 10/100Base- TX twisted-pair
The IPS 104-1Fseries Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. All PoE Powered Devices (IEEE 802.3af/at complaint) are supported, and can deliver a full 15.4W / 30W of power to the remote device.
The IPS 104-1F features 1 x 100Base-FX fiber port and 4 x 10/100Base-TX twisted-pair port.
IPS 108-2S A Industrial Unmanaged POE Switch is a High Power Sourcing Equipment (PSE) device that compliant with the IEEE802.3af/at standard, providing Power-over-Ethernet over twisted pair cables in an Ethernet network. With Two Gigabit SFP Slot, the switch extends Ethernet over distance via fiber, while also eliminating the need for individual power supply for IP video camera and wireless access points.
The IPS 108-2S A features 8 x 10/100Base-T twisted-pair ports and 2 x 1000Base-X SFP
IESG 1080 EN is 8 Port 10/100/1000Mbps Industrial Ethernet Switch for connecting with devices like network camera, industrial VoIP phone, wireless AP etc other devices. Specially designed for harsh applications, it has 6KV network port surge protection.
IESG108-2F/2S series are Unmanaged full Gigabit industrial Ethernet switches. It supports 2 Gigabit fiber ports & 8 Gigabit RJ-45 ports. This series switch is low power consumption; and the fanless design. The operating temperature rang is from -40 to 85°C. With strong EMC compatibility, it provides safe and reliable solution for industrial automation, intelligent transportation, video transmission, and other industrial application networking.
IESG series are full Gigabit Unmanaged Industrial Ethernet switches. It supports up to 4 Gigabit fiber ports and 16 Gigabit RJ-45 ports. This switch is low power consumption, the fanless design prevents it from noise interference, the operating temperature range is from - 40 to 85°C. This provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.
.jpg)
IESG 108 Series are full Gigabit Unmanaged Industrial Ethernet switches. It supports up to 4 Gigabit fiber ports and 8 Gigabit RJ-45 ports. This switch is low power consumption, the fanless design prevents it from noise interference, the operating temperature range is from - 40 to 85°C. This provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.
The IPSG 104-2S series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, and can deliver a full 15.4W / 30W of power to the remote device.
The IGPS 104-2S features 2 x 1000Base-X SFP slots and 4 x
IPSG 108-2S Industrial Unmanaged POE Switch is a High Power Sourcing Equipment (PSE) device that compliant with the IEEE802.3af/at standard, providing Power-over-Ethernet over twisted pair cables in an Ethernet network. With Two Gigabit SFP Slot, the switch extends Ethernet over distance via fiber, while also eliminating the need for individual power supply for IP video camera and wireless access points. The IPSG 108-2S features 8 x 10/100/1000Base-T twisted-pair ports and 2 x 1000Base-X SFP
IPSG S 1080 is an Industrial grade Unmanaged POE switch. It is with 8 Gigabit Ethernet ports (supports POE-af/at). This enables the switch to supply power for IEEE802.3af/at devices (PD). It supports DC input, with reverse polarity protection. It supports DIN-Rail and wall-mounted installation.
IESR S 10XX series are Unmanaged Industrial Ethernet switches. The operating temperature range is from -40 to 850C. Together with good EMC compatibility, it provides safe and reliable solution for industrial automation, intelligent transportation, Video transmission, and other Industrial application networking access
IESGR S 10XX series are Unmanaged Giga Industrial Ethernet switches. It adopts modular design and meets different industrial communication requirements. This series adopts a fanless design, without noise interference. The operating temperature range is from -40 to 850C. Together with good EMC compatibility, it provides a safe and reliable solution for industrial automation, intelligent transportation, video transmission, and other industrial application networking access.
Remote Monitoring, Remote Diagnostic and Predictive maintenance is the need of the hour. System upkeep time is vastly improved if the key decision makers are immediately alerted on failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow etc or a Solenoid valve / circuit breaker trip or a forced entry in your house can be alerted via SMS SAN designed a 2G/4G based embedded Alert system with multiple Analog / Digital Input & Digital
Remote Monitoring, Remote Diagnostic and Predictive maintenance is the need of the hour. System upkeep time is vastly improved if the key decision makers are immediately alerted on failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow etc or a Solenoid valve / circuit breaker trip or a forced entry in your house can be immediately alerted via SMS SAN designed a GPRS based embedded Alert system with multiple Analog / Digital Input &
Remote Monitoring, Remote Diagnostic, and Predictive maintenance are the need of the hour. System upkeep time is vastly improved if the key decision-makers are immediately alerted to failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow, etc. or a Solenoid valve/circuit breaker trip or a forced entry in your house can be immediately alerted via SMS SAN designed a GPRS based embedded Alert system with multiple Analog / Digital Input
Remote Monitoring, Remote Diagnostic and Predictive maintenance
is the need of the hour. System upkeep time is vastly improved if
the key decision-makers are immediately alerted on failures
occurring in a system. Change in process conditions like increase
or drop in Temperature, Pressure, Flow etc or a Solenoid valve /
circuit breaker trip or a forced entry in your house can be
immediately alerted via SMS
SAN designed a Cellular Alert system with multiple Analog / Digital
Input &
Remote Monitoring, Remote Diagnostic and Predictive maintenance is the need of the hour. System upkeep time is vastly improved if the key decision makers are immediately alerted on failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow etc or a Solenoid valve / circuit breaker trip or a forced entry in your house can be immediately alerted via SMS. SA 241V extracts Alarm conditions from Analog Input and Digital & relays them as SMS
Remote Monitoring, Remote Diagnostic, and Predictive maintenance are the need of the hour. System upkeep time is vastly improved if the key decision-makers are immediately alerted to failures occurring in a system. Change in process conditions like increase or drop in Temperature, Pressure, Flow, etc, or a Solenoid valve/circuit breaker trip or a forced entry in your house can be immediately alerted via SMS/Email.
SAN designed a GSM/GPRS-based embedded Alert system catering to various
LoRa devices SC15L, SC15L241, and Access Point SC15L APS are ideal for Machine monitoring and sending Sensor data using LoRa wireless technology, over the long-range.
SC15L LoRa transmitters connect transparently to the SC15L APS Access Point. SC15L241 sends IO data or field Modbus slave devices data to the SC15L APS, which gives output in Modbus RTU interface for monitoring. SC15L APS is used in 3 modes viz. Packet, Transparent, and SC15L241 depending on application requirement.
Hundreds
GW IoT GXQ is used for automatic communication between multiple field devices using 2G/4G enabled SIM cards. These units can communicate with each other through a centrally hosted MQTT broker. MQTT broker is hosted on cloud or static IP. Thus, these units establish a transparent data link for any external Field devices such as PLC and RTU.
GW IoT is a cellular gateway used for remote monitoring of multiple field equipment via a 2G/4G network. It acts as a Modbus master to multiple Modbus slave field devices at a single location and provides a reliable data connection to a web-based application server. The web server application can be hosted on a public network or can be installed at a central monitoring station having Static IP. It is designed to be used in industry panels and operates on an 18V-36V DC power supply.
GW IoT EM is a gateway used for remote monitoring of multiple field equipment via Ethernet WAN and WiFi network. It acts as a Modbus master to multiple Modbus slave field devices at a single location on serial and provides a reliable data connection to a web-based application server. The Web Server application can be hosted on public network or can be installed at a central monitoring station having Static IP. It is designed to be used in industry panels and operates on a 9V-30V DC power
GW IoT G1M120 is a Cellular gateway with IOs used for remote monitoring of Analog / Digital inputs via a 2G network. It can also act as a Modbus master for multiple slave field devices and provides a reliable data connection to a Web-based application server. The Web server application can be hosted on a public network or can be installed at a central monitoring station having static IP. It is designed to be used in industry panels and operates on a 24V DC power supply.
GW IoT Cellular IoT Gateway with IO’s and is used for remote monitoring of Analog/Digital inputs via 2G/4G network. It can also act as a Modbus master for multiple slave field devices and provides reliable data connection to a web based application server. The web server application can be hosted on public network or can be installed at central monitoring station having static IP. It is designed to be used in industrial panels and operates on 24V DC Power source with a range 18V- 36V DC
GW IoT Cellular gateway with IO’s is used for remote monitoring of Analog / Digital inputs via 2G/4G network. It can also act as a Modbus master for multiple slave field devices and provides a reliable data connection to a web-based application server. The web server application can be hosted on a public network or can be installed at a central monitoring station having static IP. It is designed to be used in industry panels and operates on a 12V DC power supply.
SC10E4IG-L Series Device servers can conveniently and transparently connect up to four Serial ports to an Ethernet network. Data transmission between the Serial and Ethernet interfaces is bi- directional. You can both centralize the management of your Serial devices, and distribute management hosts over the network. Each Serial port can operate independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client
The Multi-port Industrial Serial Server SC10E16A Series is a gateway between Ethernet (TCP/IP) and RS232/422/485 communications. It allows almost any serial device to a LAN network by encapsulating serial data and transporting it over Ethernet. SC10E16A offers full-duplex, bi-directional data transmission transparent between Serial port and Ethernet network.
SC10E16A S Series supports OpenVPN and IPsec, which allows you to securely communicate through the internet. Flexible configuration
SC10E32O I is a Secure Isolated RS232/RS485/RS422 Terminal Server that can enable Serial devices to be equipped with networking capability instantly and centrally manage Serial devices and hosts via network. This product supports up to 32 Isolated / Non-Isolated RS232/485/422 Serial ports to 2 of 100M Ethernet copper ports. It is a 19” Rack mounting design.
The SC10E48G Serial device servers can connect 48- port serial devices to an Ethernet network, It supports RS232 Serial standards, It can be widely applied in different fields for such as PLCs, sensors and control console. These device servers are ultra-lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.
Modbus is an industry adopted communication protocol based on RTU, ASCII, and TCP protocols for various applications; these three protocols are commonly used by various equipments in the industry, such as DCS, PLC, HMI, power meters, various sensor and measuring instruments SC10E4 M S Modbus Gateway supports.
Modbus is an industry-adopted communication protocol based on RTU, ASCII, and TCP protocols for various applications; these three protocols are commonly used by various equipment in the industry, such as DCS, PLC, HMI, Power meters, various sensor and measuring instruments.
The SC10E4 M Series support 16 simultaneous TCP master and 32 simultaneous requests for each TCP master.
Each RS232/485/422 serial port can be individually configured for Modbus RTU or Modbus ASCII, Master or Slave or
 CPU: MT7688AN MIPS CPU, 580 MHz
 RAM: 128M Bytes DDR2 RAM
 ROM: 32M Bytes Flash ROM
 OS: Open Wrt Linux OS
 4 Serial ports (RS-232/422/485 Auto Detect)
 Isolation protection 3000 VDC provided
 Support 8 Modbus TCP Master each with 32 simultaneous request
 Support 8 TCP Slaves on each RTU port.
The Multi-port Industrial Serial Server SC10EXXAM series is a gateway between Modbus ASCII/RTU to ModbusTCP Communications. It allows almost any Modbus RTU device to a LAN network by encapsulating serial data and transporting it over Ethernet. SC10EXXAM S Series offers full-duplex, bi-directional data transmission between Serial port and Ethernet network. SC10EXXAM S Series supports OpenVPN and IPsec, which allows you to securely communicate through the internet. Flexible configuration options
The Multi-port Industrial Serial Server SC10E16 is a gateway between Ethernet (TCP/IP) and RS232/422/485 communications. It allows almost any serial device to a LAN network. By encapsulating serial data and transporting it over Ethernet, SC10E16 offers full-duplex, bi-directional data transmission transparent between Serial port and Ethernet network.
Flexible configuration options enable this unit to be setup by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, SerialEthernet and Ethernet-Ethernet devices using Lon Works®, BACnet, Metasys N2, Modbus and more. The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each Bacnet Converter is provided with the necessary protocol drivers. Multiple drivers can be
GW BMS 02 02 is a Industrial Automation multi- protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet and Ethernet- Ethernet devices using Modbus, Lon Works®, BACnet, Metasys N2 and more. It supports 2 RS-485 ports.
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial and Ethernet devices using LonWorks®, BACnet, Metasys N2, Modbus and more. The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each Bacnet Converter is provided with the necessary protocol drivers. Multiple drivers can be installed on a single Converter. We can
GW BMS MM is a Industrial Automation Device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet devices using Modbus RTU / Modbus TCP Protocols. It supports 2 RS- 485 ports.
GW BMS MM is used in applications where Modbus RTU Slaves want to communicate with each other and GW BMS SS is used in applications where Modbus RTU Masters want to communicate with each other. The Modbus registers are configurable through CSV file and both RS485 ports. Our
BMS Series of Converters are Building and Industrial Automation multi- protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet and Ethernet-Ethernet devices using LonWorks®, BACnet, Metasys N2, Modbus and more. BMS 05 series is a Ethernet to Ethernet & Ethernet to Serial Protocol Converter which can convert Modbus TCP/BACnetIP, SNMP, EthernetIP/Modbus RTU/BACnet MSTP etc., to one another.
The Converter includes all the hardware
BMS Series of Converters are Building and Industrial Automation multi-protocol device servers for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet-Ethernet devices using LonWorks®, BACnet, Metasys N2, Modbus, and more. BMS 05 series is an Ethernet to Ethernet & Ethernet to Serial Protocol Converter which can convert Modbus TCP/BACnet IP, SNMP, EthernetIP/Modbus RTU/BACnet MSTP, etc., to one another.
The Converter includes all the
BMS Series of Converters are Building and Industrial Automation multi-protocol device servers for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet-Ethernet devices using LonWorks®, BACnet, Metasys N2, Modbus, and more. BMS 05 series is an Ethernet to Ethernet & Ethernet to Serial Protocol Converter which can convert Modbus TCP/BACnet IP, SNMP, Ethernet IP/Modbus RTU/BACnet MSTP, etc., to one another.
The Converter includes all the
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet- Ethernet devices using Lon Works®, BACnet, MetasysN2, Modbus, and more.
The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each BACnet Converter is provided with the necessary protocol drivers. Multiple drivers can
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet and Ethernet- Ethernet devices using Lon Works®, BACnet, MetasysN2, Modbus and more.
The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each BACnet Converter is provided with the necessary protocol drivers. Multiple drivers can be
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet- Ethernet devices using Lon Works®, BACnet, MetasysN2, Modbus, and more.
The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each BACnet Converter is provided with the necessary protocol drivers. Multiple drivers can be
The EZ Gateway M-Bus to Modbus & BACnet (FS-EZX-MBUS-MOD-BAC) is an easy to use, high-performance building and industrial automation protocol gateway for integrators to interface M-Bus products to Modbus and BACnet management systems in commercial buildings, campuses and industrial facilities over Modbus RTU, Modbus TCP/IP, BACnet MS/TP or BACnet/IP protocols. M-Bus products encompass a wide range of applications such as energy, gas, heating, water, VFD drives and PLCs. The EZ Gateway M-Bus
BMS Converter is a Building and Industrial Automation multi- protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet and Ethernet- Ethernet devices using Lon Works®, BACnet, Metasys N2, Modbus and more.
The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. GW BMS 03 supports conversion between LonWorks, BACnet and Modbus protocols.
GW IEC is specifically designed gateway for Power Industry applications. It is used to interface conventional field devices with IEC 60870-5-104 / IEC 60870-5-101 protocols to SCADA networks with and MODBUS RTU / Modbus TCP protocols. It is typically used with Alarm announciators, Circuit Breakers, Protection Relays, PLCs, Transformer Monitoring systems, Capacitor Banks etc.
Model SC09FEDG provides a cost effective plug-and-play solution for long- range 10Base-T, 100Base-TX and 1000Base-TX Ethernet extensions. It has an added benefit of Auto-negotiation, MDI/MDI-X making it the perfect choice when planning future upgrades of Ethernet networks. Built-in Auto-sensing capabilities enable Full or Half-duplex Ethernet operation with no configuration
required
Model SC09FENS provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions. It has an added benefit of 10/100 Auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Built-in Auto-sensing capabilities enable Full or Half-duplex Ethernet operation with no configuration required.
SC09FEN-SFP Optical Media Converter has the flexible 100X SFP slot design making it easy for users to use different SFP
Model SC09FENGS provides a cost-effective plug-and-play solution for long-range Giga Ethernet extensions. Built-in Auto-sensing capabilities Full or Half-duplex Ethernet operation with no configuration required.
SC09FENGS Media Converter has a flexible SFP slot design making it easy for users to use different SFP modules according to their needs.
Cellular modem is a multi-functional, ready to use, rugged unit that can be embedded or plugged into any application. The modem can be controlled and customized to various levels by using the standard AT commands. The modem is fully type-approved, it can speed up the operational time with full range of Voice, Data, Fax and Short Messages.
PSE 106GW is Single-port, 60W, PoE Injector for Terminal devices. It supports data 10/100/1000 Mbps. It provides 55Vdc, 1.1A power for remote PDs over full 4-pairs output.
It is fully compliant with IEEE802.3 af/at and PoE ++ standards. It supports Terminal devices, such as Wireless AP, High Power
network camera, IP phone etc. It has detection chip inside, which will detect and classify PD before powering it. It will not apply power until a standard-compliant PD is detected.
GW IoT GXM 241 Cellular gateway with IO’s is used for remote monitoring of Analog / Digital inputs via 2G/4G network. It can also act as a Modbus master for multiple slave field devices and provides reliable data connection to a web based application server. The web server application can be hosted on public network or can be installed at central monitoring station having static IP. It is designed to be used in industrial panels and operates on 12V DC power supply.
GW IoT Cellular IoT Gateway with IO’s and is used for remote monitoring of Analog / Digital inputs via 2G/4G network. It can also act as a Modbus master for multiple slave field devices and provides a reliable data connection to a web-based application server. The web server application can be hosted on a public network or can be installed at a central monitoring station having static IP. It is designed to be used in industry panels and operates on a 24V DC Power source with a range of
The Industrial Serial Device Server SC10E4 S series is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SC10E4 S Series products offer full-duplex and bi-directional data seamlessly between the 4 Serial ports and the Ethernet network, through 2 x 10/100 Ethernet ports or 2 x 100/1000 SFP Fiber slots. SC10E4
The Multi-port Industrial Serial Server SC10E08A Series is a gateway between Ethernet (TCP/IP) and RS232/422/485 communications. It allows almost any serial device to a LAN network by encapsulating serial data and transporting it over Ethernet. SC10EXXA offers full-duplex, bi-directional data transmission transparent between Serial port and Ethernet network.
SC10EXXA S Series supports OpenVPN and IPsec, which allows you to securely communicate through the internet.
Flexible
SC10E16O I is Secure Isolated RS232/RS485/RS422 Terminal Server that can enable Serial devices equip with networking capabilities instantly and centrally manage Serial devices and hosts via network.
This product supports upto 32 Isolated RS232/485/422 Serial ports to 2 of 100M Ethernet copper ports. It is a 19” Rack mounting design.
SC10E32O I is Secure Isolated RS232/RS485/RS422 Terminal Server that can enable Serial devices equip with networking capability instantly and centrally manage Serial devices and hosts via network.
This product supports upto 32 Isolated RS232/485/422 Serial ports to 2 of 100M Ethernet copper ports. It is a 19” Rack mounting design.
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet-Ethernet devices using Lon Works®, BACnet, Metasys N2, Modbus, and more. The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each Bacnet Converter is provided with the necessary protocol drivers. Multiple drivers can be
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet- Ethernet devices using Lon Works®, BACnet, MetasysN2, Modbus, and more. The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each BACnet Converter is provided with the necessary protocol drivers. Multiple drivers can be
GSF Cellular/IoT router device provides data transmission function by public LTE / WCDMA /GPRS / EDGE network It uses an Industrial High performance CPU and embedded real-time operating system.
It has 2*RS232, 1*RS232 ( Debug port ) and 1*RS485, 1 * Ethernet, 1* WAN & 1*WiFi ports that can conveniently and transparently connect your existing Serial and Ethernet devices to a cellular network. It has been widely used on M2M fields, such as self-service Terminals, Intelligent transportation,
LTE&WCDMA Router is a cellular device that provides data transmission function by public LTE-FDD network It uses Industrial 32-bits CPU and embedded real time operating system It supports RS232 (or RS485/RS422) and Ethernet port that can conveniently and transparently connect your existing serial and Ethernet devices to a cellular network.
It has been widely used on M2M fields, such as self-service terminal, intelligent transportation, smart grid, industrial automation, telemetry,
Sensors are used to continuously monitor and control various process parameters. These measurements help improving processes for adhering to product specifications & improve product quality. Monitoring and controlling temperature, pressure, level, flow etc are common occurrences for any process. IO Converters convert the Analog & Digital data from Sensors to Modbus to be taken to SCADA for further processing.
RIO241 is used to monitor field inputs and control outputs through Modbus interface. It acts as a Modbus RTU slave and updates status of analog and digital inputs in predefined Modbus registers. Digital outputs of RIO241 can be controlled through Modbus registers. It is designed to be used in Industrial panels and operates on 24V DC power supply.
.jpg)
RIO884 is used to monitor field inputs and control outputs through Modbus interface. It acts as a Modbus RTU slave and updates status of analog and digital inputs in predefined Modbus registers. Digital outputs of RIO884 can be controlled through Modbus registers. It is designed to be used in Industrial panels and operates on 24V DC power supply.
BMS Series of Converters are Building and Industrial Automation, multi- protocol device servers for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet and Ethernet-Ethernet devices using LonWorks®, BACnet, Metasys N2, Modbus and more.
BMS 05 series is a Ethernet to Ethernet & Ethernet to Serial Protocol Converter which can convert Modbus TCP/BACnetIP, SNMP, EthernetIP/Modbus RTU/BACnet MSTP etc., to one another.
The Converter includes all the
GW 01 02 R is a Ring Redundancy Protocol Converter. In a RS485 network, 32 devices can be multidropped. Since this loop can travel upto 1.2km, there are many chances that there may be a cable break, causing the communication of the later devices to stop. You end up losing critical data. Redundancy in a 485 multidrop loop is not possible
The Redundancy scheme involves both these RS485 ports along with a specially designed firmware. GW 01 02 R also provide Modbus RTU to Modbus TCP conversion.
BMS Converter is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet, and Ethernet- Ethernet devices using Lon Works®, BACnet, MetasysN2, Modbus, and more.
The Converter includes all the hardware and software to enable the customer’s products to interface to various networks. Each BACnet Converter is provided with the necessary protocol drivers. Multiple drivers can be
The IES 104-2S A series is a performance and cost-effective Industrial Ethernet Switch that meet the high reliability requirements of industrial network operations. It is designed to extend the distance of a network by converting Fast Ethernet data between twisted pair cabling and multi-mode or single-mode fiber-optic cabling.
It features 2 x 100Base-X SFP Slot and 4 x 10/100Base-TX twisted-pair port. The SFP slots are MSA-complaint pluggable 155M SFP.
IESG 1050 EN is 5 Port 10/100/1000Mbps Industrial Ethernet Switch for connecting with devices like network camera, industrial VoIP phone, wireless AP etc other devices. Specially designed for harsh applications, it has 6KV network port surge protection.
The IESG 104-2S series Unmanaged Industrial Switch is the ideal solution for carrying Ethernet ports to long distance via different networks. The IESG 104-2S features 2 x 1000Base-X SFP slots and 4 x 10/100/1000Base-TX twisted-pair port. The twisted-pair port has 4 x RJ-45 connector with a maximum operating distance of 100m. The IESG 104-2S provides two SFP slot for any MSA-complaint pluggable 1.25G SFP transceivers.
The IPSGR 1024-4SG series is designed for Industrial applications. Thanks to its wide operating temperature it can operate reliably in harsh environments. Designed with 24 Gigabit ports and 4 Gigabit SFP ports (Combo), it provides abundant and flexible connection. It contain surge protection to ensure system stability and Relay outputs for greater user flexibility.
IESM S 3080 series are managed industrial Ethernet switches. It supports up to 8 ports. It supports 1 Console port, provides CLI management; and it supports industrial field Ethernet layer 2 protocol. This switch is low power consumption. The fanless design prevents it from noise interference. The operating temperature range is from -40 to 85°C and together with EMC compatibility, it makes the switch work stable under poor environment which provides safe and reliable solution for all
IESMG 3012-XXS A Industrial Managed Switch is fully Managed L2 switches,with store-forward architecture, fan-less and energy-saving design, with 12 * 10/100/1000Base-T Copper port and upto 12 * 1.25G/155M SFP fiber port.
IESMG 3012-XXS A is designed with protection against Lightning, anti-static and operate in -40°C to 75°C for harsh environments such as Industrial automation, Security, Power system, Intelligent transportation systems (ITS), Mining , Water Management & Oil fields.
IESMG series are full Gigabit managed industrial Ethernet switches. It adopts modular structure design, supports up to 4 Gigabit fiber ports and 16 Gigabit RJ45 ports. It is safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.
IPSMG 3012-12S Industrial Managed Switch is fully Managed L2 switch, with Store and Forward architecture, fan-less and energy-saving design, with 12*10/100/1000Base-T PoE(af/at) Copper port and 12 * 1.25G/155M SFP fiber port.
IPSMG 3012-12S is designed with protection against Lightning, anti-static and operate in -40°C to 75°C for harsh environments such as Industrial automation, Security, Power system, Intelligent transportation systems (ITS), Mining , Water Management & Oil
Datasheet
Replaces any existing Serial cable, Full Bluetooth 2.1 + EDR support, Support Bluetooth Radio with Class 1 RF, It can also communicate with other Bluetooth devices, No external software needed, Easy to install, RS232 x 1 Port (DB9) or RS422/485 x 1 Port (4-pin Terminal Block), RS485/422 Surge protection, Plug-and Play type
Modbus is an industry adopted communication protocol. High end CPU makes it an idle choice for applications like Energy Meters, Solar controls, Data connectivity applications between DCS, PLC, HMI, Sensors, Measuring instruments. SC10MA is a Secured Device Server supporting OpenVPN and IPsec VPN encryption. It has 1 * RS232/485/422 Serial Port and 2 * 10/100Mbps Fast Ethernet ports with 1 * USB 2.0 high speed OTG port. Optional 802.3af PoE models can be powered through the Ethernet
SC10MKI is a Isolated, Multihost, Modbus RTU to Modbus TCP protocol converter. High end CPU makes it an idle choice for applications like Energy Meters, Solar controls, Data connectivity applications between DCS, PLC, HMI, Sensors, Measuring instruments etc. It supports 4 Modes, RTU Master / ASCII Master to TCP Slave Up to 8 simultaneous TCP Master with 32 simultaneous requests per Master and Serial Master can access to 8 TCP Slaves simultaneously
Modbus is an industry adopted communication protocol. Serial Modbus to Wi-Fi Modbus TCP Converter provides a perfect solution to make your Serial devices Internet / Ethernet ready, instantly, via WiFi LAN making it possible for your software to access serial devices anywhere and anytime.
Modbus is an industry adopted communication protocol. Serial Modbus to Wi-Fi Modbus TCP Converter provides a perfect solution to make your Serial devices Internet / Ethernet ready, instantly, via WiFi LAN making it possible for your software to access serial devices anywhere and anytime.
Modbus is an industry adopted communication protocol. Serial Modbus to Wi-Fi Modbus TCP Converter provides a perfect solution to make your Serial devices Internet / Ethernet ready, instantly, via WiFi LAN making it possible for your software to access serial devices anywhere and anytime.
CPU : MT7688AN MIPS CPU, 580 MHz
RAM : 128M Bytes DDR2 RAM
ROM : 32M Bytes Flash ROM
OS : Open Wrt Linux OS
Support Modbus TCP, Modbus RTU, Modbus ASCII
Support 8 simultaneous TCP Masters and 32
SC10MK2 DataCon is a 2 port Modbus RTU to Modbus TCP and WiFi Converter along with Data concentration feature. If your Slave devices have scattered addresses or if you need to increase the speed of your communication then SC10MK2 DataCon collects the data from the Slaves & stores in a pre configured mapping table. This data is then available to the SCADA efficiently with very few number of queries
SC10MK2-485 MT is a 2 Serial Port Modbus RTU to Modbus TCP protocol converter. High end CPU makes it an idle choice for applications like Energy Meters, Solar controls, Data connectivity applications between DCS, PLC, HMI, Sensors, Measuring instruments etc. Both the Serial ports are RS485/422 configurable. SC10MK2 485 MT L supports Data Logging.
The Logger can work as Modbus TCP to RTU or RTU to TCP, The Logger page will show instance data for every Serial port, The Logger provide
Model SC09 provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions. It has an added benefit of 10/100 Auto-negotiation, making it the perfect choice when planning future
upgrades of 10Base-T networks. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required.
SC12FE2IS is a Industrial grade Dual 10/100Base-TX ports to 100Base-FX unmanaged Media Converter. It enables you to mix legacy twisted-pair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free
& robust process of data conversion. With Auto-Negotiation function, these units will automatically tailor themselves to convert both Half or Full duplex Ethernet signals, depending on your specific network needs. DIP switch can implement functions such as Jumbo frame,
Datasheet 
