Key Features & Benefits
1. Features 8 Gigabit RJ45 ports and 2 SFP uplinks for flexible copper and fiber connectivity.
2. Supports up to 60W PoE on Port 1, 30W on Ports 2–8, with a 135W total budget.
3. Features 20 Gbps switching capacity and 14.44 Mpps forwarding performance.
4. Supports STP, RSTP, MSTP, EPPS, EAPS, and ERPS for fast ring recovery and network resilience.
5.Supports 4,096 VLANs, Voice VLAN QoS, multicast control, and DHCP Snooping.
6. Combines 802.1X, ACLs, port isolation, loop protection, and advanced QoS scheduling for secure, efficient traffic management.
7. Features an IP30 enclosure, 6 kV surge protection, AC power supply, and Web, CLI, and SNMP management.
PRODUCT CATEGORIES
Introduction
The SAN Telequip LPSMG-3008-2S-AC is an 8-port Gigabit Layer 2 Managed PoE Ethernet Switch equipped with 2 additional 100M/1000M SFP fiber-optic uplink slots. Designed for high-speed copper and fiber connectivity, it provides an ideal infrastructure solution for building management systems (BMS), IP surveillance networks, and commercial enterprise deployments.
The switch features advanced Power over Ethernet (PoE) capabilities, supporting IEEE 802.3af/at/bt standards. Port 1 delivers high-power PoE++/bt output up to 60W for power-hungry terminal equipment, while Ports 2–8 deliver up to 30W per port, with a total PoE power budget of 135W. Driven by a 500MHz CPU, 1GB DDR3 RAM, 128MB Flash, and a 4.1 Mbit SRAM packet buffer, the unit delivers a switching bandwidth of 20 Gbps and a packet forwarding rate of 14.44 Mpps.
For robust network administration and uptime, the LPSMG-3008-2S-AC incorporates comprehensive Layer 2 management features including VLAN tagging, Voice VLAN, IGMP Snooping, and multi-mode QoS priority scheduling. It supports industrial ring redundancy protocols (STP, RSTP, MSTP, EPPS, ERPS, EAPS) for sub-50ms self-healing protection, combined with a metal housing featuring IP30 protection, 6 kV lightning surge protection, and a built-in 100–240V AC power supply
Packet Forwarding Rate: 14.44 Mpps
MAC Address Table: 8K / 16K MAC address learning and aging
Packet Buffer: 4.1 Mbit SRAM Packet Buffer
Processor & Memory: 500MHz CPU, 1GB DDR3 RAM, 128MB Flash, 128MB RAM
Jumbo Frame: 10000 Bytes
Transmission Mode: Store and Forward (full wire speed)
Flow Control: Half-duplex back pressure control, Full-duplex PAUSE frame
SFP Slots: 2 × 100M/1000M SFP slots
Console Port: 1 × RJ45 Console port
Reset Key: 1 × Hardware Reset button
Auto Identification: Auto-MDI/MDIX straight-through and crossover cable identification
Auto-Negotiation: Automatic transmission rate and duplex mode negotiation
System LED: SYS indicator
SFP LEDs: Ports 9–10 connection status indicators
RJ45 Port LEDs: Green LED = 100M / LAN Link LED; Orange LED = 1000M / PoE LED)
100BASE-TX: Cat5 or later UTP (≤ 100 meters)
1000BASE-TX: Cat6 or later UTP (≤ 1000 meters)
Switch Power Consumption: Max 15W internal consumption
PoE Power Output:
- Port 1: IEEE 802.3af/at/poe++/bt (Max 60W PoE output)
- Ports 2–8: IEEE 802.3af/at (Max 30W per port PoE output)
Total PoE Budget: 135W
PoE Pin Assignment:
- Af/at/bt: 12+ 45+ ; 36- 78-
- Af/at: 12+ 36-
(Product): 225 mm × 127 mm × 35 mm (L × W × H)
(Packing): 265 mm × 220 mm × 68 mm (L × W × H)
Weight:
Net Weight 1.0 kg
Gross Weight 1.4 kg
Protection Rating: IP30
Surge Protection: 6 kV (8/20µs) lightning protection level
Installation: Desktop installation (optional wall-mount brackets available)
Operating Humidity: 5% to 90% RH (Non-condensing / Non-coagulation)
Storage Temperature: -40°C to +75°C
Storage Humidity: 5% to 95% RH (Non-condensing / Non-coagulation)