Key Features & Benefits
1. Features 16 Gigabit PoE ports and 2 SFP slots for copper and high-speed fiber connectivity.
2. Supports 90W PoE++ on Ports 1–2 and 30W PoE on Ports 3–16, with a 300W power budget.
3. Powered by a 500 MHz CPU, 1GB DDR3 memory, and 4.1 Mbit buffer, delivering 56 Gbps switching capacity and 41.67 Mpps forwarding.
4. Supports STP, RSTP, MSTP, EPPS, EAPS, and ERPS for fast network recovery and redundancy.
5. Supports 4,096 VLANs, Voice VLAN, IGMP/MLD snooping, and multicast management for efficient traffic segmentation.
6. Features 802.1X, ACLs, QoS scheduling, storm suppression, and automatic loop recovery for enhanced security and traffic control.
PRODUCT CATEGORIES
Introduction
The LPSMGR-3016-2S-AC is a 16-port Gigabit Layer 2+ Managed Power over Ethernet (PoE) Ethernet Switch equipped with 2 additional 100M/1000M SFP optical slots for high-speed fiber-optic uplink connectivity. Designed for commercial enterprise networks, building management systems (BMS), and IP surveillance systems, it integrates high-density Gigabit copper connections with flexible long-distance fiber expansion capabilities.
The switch features advanced Power over Ethernet capabilities across all 16 Ethernet RJ45 ports, backed by a total PoE power budget of 300W. Ports 1 and 2 deliver high-power PoE++/bt output up to 90W per port, making them ideal for power-hungry terminal devices such as PTZ cameras, high-power wireless access points, or display kiosks. Ports 3 through 16 support IEEE 802.3af/at standards with up to 30W per port. Underneath its rack-mountable IP30 metal chassis, the switch operates on a 500 MHz CPU with 1GB DDR3 RAM, a 4.1 Mbit SRAM packet buffer, and a non-blocking switching fabric offering 56 Gbps switching bandwidth and 41.67 Mpps packet forwarding performance.
To ensure enterprise-class stability and management flexibility, the LPSMGR-3016-2S-AC incorporates advanced Layer 2+ software capabilities including 802.1Q VLAN, Voice VLAN, QoS traffic prioritization, and comprehensive loop prevention protocols such as STP, RSTP, MSTP, ERPS, EPPS, and EAPS ring architectures. Security and maintenance are reinforced via IP/MAC-based Access Control Lists (ACLs), 802.1X authentication, port isolation, DHCP Snooping, 6 kV lightning surge protection, and complete web, CLI (Console/Telnet/TFTP), SNMP, and RMON network management interfaces.
ERPS (Ethernet Ring Protection Switching), EPPS, EAPS
Packet Forwarding Rate: 41.67 Mpps
MAC Address Table: 8K (Hardware) / 16K (Software learning and aging)
Jumbo Frame: 10,000 Bytes
Packet Buffer: 4.1 Mbit SRAM Packet Buffer
Processor & Memory: CPU 500 MHz, 1G DDR3 RAM, 128MB Flash, 128MB RAM
VLAN Capacity: Up to 4096 (4K) VLANs, Voice VLAN support
Transmission Mode: Store and Forward (full wire speed)
Fiber SFP Ports: 2 × 100M/1000M SFP slots
Console Port: 1 × Console Port
Reset Key: 1 × Reset Button
Cable Sequence: Auto-MDIX (auto-identification of straight-through and crossover cables)
Negotiation Mode: Auto-negotiation of rate and duplex mode
SYS: System LED indicator
Ports 1–16: 10/100/1000M Network connection indicators
Ports 17–18: SFP connection indicators
100BASE-TX: Cat5 or later UTP (≤ 100 meters)
1000BASE-TX: Cat6 or later UTP (≤ 1000 meters)
Total Power Consumption: Max 315W
Total PoE Power Budget: 300W
PoE Port Output:
- Ports 1–2: IEEE 802.3af/at/poe++/bt (Max 90W per port)
- Ports 3–16: IEEE 802.3af/at (Max 30W per port)
PoE Pin Assignment:
- af/at/bt: 12+, 45+; 36-, 78-
- af/at: 12+, 36-
Packing Dimensions (LWH): 515 mm * 375 mm * 95 mm
Weight: Net Weight 3.2 kg / Gross Weight 4.0 kg
Protection Rating: IP30
Surge Protection: 6 KV 8/20us lightning protection
Installation: Rack bracket mountable (19-inch 1U)
Operating Humidity: 5% to 90% RH (non-coagulating)
Storage Temperature: -40°C to +75°C
Storage Humidity: 5% to 95% RH (non-coagulating)