Key Features & Benefits
1. Equipped with 8 Gigabit RJ45 ports and 2 SFP uplinks for high-speed connectivity.
2. Delivers 20 Gbps switching capacity, 14.44 Mpps forwarding, and 16K MAC address support.
3. Supports STP, RSTP, MSTP, ERPS, EAPS, and EPPS for reliable network redundancy.
4. Supports 4096 VLAN entries, IGMP Snooping, and MLD Snooping for efficient network management.
5. Supports IEEE 802.1p, ToS/CoS, and WRR, SP, and WFQ for optimized traffic prioritization.
6. Ensures network security with authentication, ACLs, and traffic control.
7. Supports Web GUI, CLI, SNMP, RMON, and optical power monitoring for easy network management.
PRODUCT CATEGORIES
Introduction
The LESMG-3008-2S-AC is a high-performance Layer 2 Managed Ethernet Switch engineered by SAN Telequip for enterprise, surveillance, and industrial communication networks that require reliable Gigabit connectivity. The switch features eight 10/100/1000 Mbps RJ45 ports alongside two Gigabit SFP fiber uplink ports, delivering wire-speed forwarding, robust Layer 2 switching capabilities, multicast management, Quality of Service (QoS), and network security features.
Built for scalable network deployments, the device is powered by a 500 MHz CPU, 1 GB DDR3 DDR memory, 128 MB Flash memory, 128 MB RAM, and a 4.1 Mbit packet buffer. It offers comprehensive network management options including SNMP, Web GUI, Telnet, and CLI, while supporting advanced Layer 2 functions such as VLANs, Link Aggregation, and multiple Ring Redundancy protocols.
Short Technical Description: Designed in a compact desktop form factor with an IP30 protection class rating, the unit operates on a wide AC power input of 100~240V (50/60 Hz) and features built-in 6 kV surge protection. It delivers a total switching capacity of 20 Gbps and a packet forwarding rate of 14.44 Mpps, with support for up to 16K MAC address entries, 4096 VLANs, 10 KB Jumbo Frames, and optical power monitoring.
Packet Forwarding Rate: 14.44 Mpps
MAC Address Table: 16K entries
Packet Buffer: 4.1 Mbit
Jumbo Frame Size: 10 KB
VLAN Entries: 4096
CPU / Memory: 500 MHz CPU, 1 GB DDR3 DDR, 128 MB RAM, 128 MB Flash
Fiber Uplink Ports: 2 × 100/1000 Mbps SFP
Console Port: 1 × Console port
Reset Button: Yes
SYS: System LED
SFP (9-10): SFP connection indicator
Port (1-8): Network connection indicator (Green LED = 100M / Orange LED = 1000M)
Maximum Power Consumption: 15 W
Surge Protection: 6 kV
Weight: 1.0 kg (Net) / 1.3 kg (Gross)
Installation: Desktop
Protection Class: IP30
Storage Temperature: -40°C to +75°C
Operating Humidity: 5% to 90% RH (non-condensing)
Storage Humidity: 5% to 95% RH