Key Features & Benefits
1. Enables IEC 61850 MMS for standardized monitoring and substation integration
2.Web, CLI, Telnet, SNMP v1/v2c/v3, IEC 61850 MMS, Syslog, RMON, and LLDP support
3. Sub-50 ms redundancy via DTRing, DRP/DHP, MSTP
4. Redundant HV/DC power inputs for continuous, reliable operation
5. Advanced QoS with 8 queues, 802.1p, DiffServ, and ACL for stable critical traffic
PRODUCT CATEGORIES
Introduction
The switch provides high-density Gigabit connectivity through a versatile configuration of up to 28 ports. This architecture consists of 24 10/100/1000BaseT(X) RJ45 copper ports for local equipment integration and 4 100/1000BaseX SFP fiber interfaces. This combination allows solution architects to balance high-bandwidth local copper connections with long-distance, EMI-resistant fiber optic uplinks required to connect remote nodes to a centralized control center.
Strategically, the IESMGR 6024-4S transitions the network from a simple transport layer to a secure routing platform. By integrating advanced Layer 3 capabilities—including OSPFv2, RIP, and VRRP—the switch enables efficient inter-VLAN communication and provides gateway-level redundancy. Furthermore, its adherence to the IEC 62443-4-2 industrial cybersecurity standard ensures that critical infrastructure is shielded against unauthorized access, fulfilling modern requirements for defense-in-depth and network integrity.
Layer 2 Standards: 802.1p (CoS), 802.1Q (VLAN), 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP), GMRP
Layer 3 / Multicast: OSPFv2, RIPv1/v2, VRRP, Static Routing, IGMP Snooping v1/v2/v3, PIM-SM, PIM-DM
Security & Timing: HTTPS/SSL, SSH, SFTP Client, SNTP, PTPv2 (Precision Time Protocol)
Packet Buffer: 32 Mbit
Switching Delay: <10 µs
Jumbo Frame Size: Up to 10 KB
VLAN Support: 4K VLANs (ID range 1–4093)
Multicast Groups: Up to 1K groups
Gigabit RJ45 Ports: 24 x 10/100/1000BaseT(X) ports
Console Port: RJ45, RS232 (Serial management)
Alarm Contact: 3-pin terminal block (Max: 250VAC/220VDC, 2A)
ALARM: Alarm state (Power, Ring, Port, SFP RX Power)
PWR1 / PWR2: Redundant power input status
Link/ACT: Port connectivity and data activity
Speed: Transmission rate indicator (based on port type)
100/1000BaseX SFP: Fiber optic (Distance is dependent on the specific SFP module used)
Dual DC Input Options: 24-48VDC (Range: 18-72VDC)
Power Consumption: <25W
Weight: 5 kg
Housing: IP40 Metal, fanless natural convection
Mounting: 19-inch Rackmount (Primary); Optional DIN rail or panel mounting
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Mechanical Standards: IEC 60068-2-6 (Vibration), 60068-2-27 (Shock), 60068-2-32 (Free Fall)
| Categories | AC Supply | DC Supply | Download |
|---|---|---|---|
| IESMGR 6024-4S HV D | – | ||
| IESMGR 6024-4S DC D | – |