Key Features & Benefits
1. Instantaneous Serial Device Modernization and Remote Access
2. Robust Dual-Port Serial Connectivity with Comprehensive Protection
3. Extensive Modbus Protocol and High-Volume Master Support
4. Reliable 802.11b/g/n WiFi and Long-Range Coverage
5. High-Performance Internal Hardware and Open-Source Operating System
6. Secure and Flexible Configuration Options
7. Rugged Design and Wide Environmental Operating Tolerance
PRODUCT CATEGORIES
designed for high-speed data transmission in industrial control systems.
SC10MK2 MT
enabling long-distance data communication with robust signal conditioning
SC10MK X E
multi-device data transfer for automation networks
SC10MK2 485 MT
RS232/485 communication with extended electrical protection
SC10EK X E
OpenWrt Linux on a 580 MHz MIPS CPU with 128MB RAM
SC10E4I MK 502
TCP gateway equipped with a 580 MHz MIPS CPU, 128MB DDR2 RAM
SC10E4I MK
TCP converter featuring two RS485/422 configurable serial ports
SC10MK2 485 MT 502
Introduction
The SC10MK2 MT W introduces a strategic advantage by enabling wireless connectivity for serial Modbus devices. This converter is designed to eliminate the costs and constraints of physical cabling, providing unparalleled deployment flexibility for industrial equipment in hard-to-reach locations or dynamic environments. It makes serial devices instantly accessible over a Wi-Fi LAN, allowing software to monitor and control them from anywhere within the wireless network.
As a 2-port Modbus RTU to Modbus TCP converter with integrated Wi-Fi, the SC10MK2 MT W is fully compatible with 802.11b/g/n networks. A key feature is its Soft AP mode, which allows users to connect directly to the device with any Wi-Fi enabled computer or smartphone for initial setup and configuration, simplifying the installation process. This combination of powerful Modbus conversion and wireless freedom makes it a perfect solution for modernizing industrial communication.
RAM: 128M Bytes DDR2 RAM
ROM: 32M Bytes Flash ROM
OS: OpenWrt Linux OS
Serial Speed: 300 bps to 921.6 Kbps
Wi-Fi Data Rate: 11/54/72.2 Mbps @ 20 MHz
Wi-Fi Modulation: DSSS, OFDM
Wi-Fi Frequency: 2.4GHz
Wi-Fi Tx Power: Max. 22dBm (11b), Max. 19dBm (11g/n)
Wi-Fi Rx Sensitivity: -76dBm@54Mbps, -89.5dBm@11Mbps
Wi-Fi Tx Rate: Max. 54Mbps with auto fallback
Serial Ports: Port 1 (RS-232), Port 2 (RS-422/485)
Antenna: 2 dBi, RP-SMA connector
Consumption: 200mA@12V
Connectors: Screw type terminals or DC Jack
Weight: 110 gm
Housing: Plastic
Storage Temperature: -25°C to 80°C