SC10EK

Home » SC10EK
SC04M2
Serial to Ethernet converter with AC or DC power options. Can be configured for Server or Client Mode on Ethernet side. Run serial port long distance over network. Virtual COM port utility enables protocol independent connection with remote serial devices.

pdf Data Sheet | pdf User Manual

Interfaces

Ethernet Interface
Network Protocols

Serial Interfaces
Interface Selection
LED Indication
Configuration

Ethernet Port
Serial ports
Modes

RJ45 connector, 10/100 BaseT

UDP, TCP, ICMP, HTTP and ARP

RS232, RX, TX, RTS, CTS RS485 2-wire, 4-wire : 9 Pin Plugable Header Strip : Upto 115.4 Kbps

DIP Switch Settable

LED’s for Ethernet / Serial activity & Configuration mode

All the Serial and Network parameters of SC10 can be configured using Set Up utility from Serial as well as from Ethernet side

1.5KV

15KV ESD

Master / Slave. Both Modes are possible : Single Master, Multiple Slaves

Electrical

Input Supply

230V AC, 150mA. Range 90 to 270V AC 3KV Galvanically Isolated DC Supply options are also available on request

Mechanical

Enclosure

MS Enclosure. Dimensions : 126 x 80 x 40 mm (L x W x H) : Table Top. Provision for Panel mounting with Clamps

Environmental

Operating Temperature
Operating Relative Humidity

0 – 55deg. C

10 to 90 % Rh. Non condensing